Pelco DD53TC16-X Manuel d'utilisateur télécharger pdf (Page 21)

C2446M-E (11/05) 21

BACKLIGHT COMPENSATION (BLC)

If a bright backlight is present, the subjects in the picture may appear dark or as a silhouette.

Backlight compensation enhances objects in the center of the picture. The dome uses the center

of the picture to adjust the iris. If there is a bright light source outside of this area, it will wash

out to white. The camera will adjust the iris so that the object in the sensitive area is properly

exposed.

There are two backlight compensation settings:

ON Backlight compensation is activated.

OFF (default) Backlight compensation is not activated.

NOTE: If backlight compensation is ON, decrease the Auto Iris setting. Refer to the

Auto Iris

section.

VIDEO LEVEL

Set the video output to one of the following:

NORMAL 1.0 volt peak-to-peak

HIGH (default setting) 1.2 volt peak-to-peak to compensate for losses in video cable.

BACK

EXIT

ADVANCED SETTINGS

SHUTTER SPEED AUTO

AGC LIMIT 25

AUTO IRIS AUTO

AUTO IRIS LEVEL 66

AUTO IRIS PEAK 8

AUTO SHARPNESS ON

SHARPNESS LEVEL 26

AUTO WHITE BALANCE ON

R GAIN 482

B GAIN 678

BACKLIGHT COMP OFF

VIDEO LEVEL HIGH

BACK

EXIT

AUTO FOCUS ON

ZOOM LIMIT X128

ZOOM SPEED MEDIUM

LOW LIGHT LIMIT 2

CAMERA

EXIT

SPECTRA III

LANGUAGE ENGLISH

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

<ZONES>

<ALERT>*

<CLEAR>

BACK

EXIT

DOME SETTINGS

*This setting only applies to

Pressurized Spectra III dome

systems with software version

1.25 or higher.

(See page 11)

Quick Programming Guide

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Commentaires sur ces manuels

Pas de commentaire

Pelco DD53TC16-X Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Caméras de sécurité Pelco DD53TC16-X