Pelco DD53TC16-X Manuel d'utilisateur télécharger pdf (Page 7)

C2446M-E (11/05) 7

WELCOME

Thank you for purchasing Pelco’s premier integrated dome system, Spectra III. Your new system

features a high resolution, color camera/optics package with LowLight

™

technology and

programmable dome drive software.

This manual is designed to be a reference tool for the operation and programming of your

system. Inside you will find information about Spectra III’s features and commands, as well as a

detailed menu tree.

Getting Started

You will need to install your dome system before using this manual. Refer to the installation

packet supplied with the back box for installation instructions.

Once installed apply power to the Spectra III dome system. The system will start a configuration

sequence. When configuration is done, the following information is displayed:

Pelco Spectra III

*Version X.XX

D Address: 1

P Address: 2

Comm 2400, N, 8, 1

CONFIGURE DONE

This information will remain on the monitor until dome operation begins.

Refer to the following pages to learn how to operate and program your dome system.

* Pressurized Spectra III dome systems require software version 1.25 or higher to monitor

temperature, pressure, and dew point.

1 2 3 4 5 6 7 8 9 10 11 12 ... 41 42

Pas de commentaire

Pelco DD53TC16-X Manuel d'utilisateur Page 7