Pelco DD53TC16-X Manuel d'utilisateur télécharger pdf (Page 37)

C2446M-E (11/05) 37

SOFTWARE/LANGUAGE FILE UPLOAD

The RJ-45 data port of the dome drive allows access for on-site setup, testing, and uploading of

revised operating software and language files. A Pelco field service tool is required to perform

these operations. Field service tools include Pelco’s remote monitor kit (IPS-RMK), remote data

port box (IPS-RDPE-2), and remote monitor cable (IPS-CABLE).

For instructions on how to upload revised operating software and language files refer to the

Installation/Operation manual supplied with the field service tool.

NOTE: Only perform software uploads when necessary. Software uploads do not need to be

performed if the dome system is operating properly.

UPLOAD ICON

During a software/language file upload, an icon will appear on the monitor to indicate data is

being transferred to the Spectra dome system (refer to the figure below). The default setting for

data transmission is 115.2 KB per second. Noisy and long-run connections will slow the

transmission rate.

Upload Icon

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Pelco DD53TC16-X Manuel d'utilisateur Page 37