Pelco DVR DX3016-060 Manuel d'utilisateur télécharger pdf (Page 85)

84 Pelco Manual C681M-D (2/02)

WARRANTY AND RETURN INFORMATION

REVISION HISTORY

Manual # Date Comments

C681M 01/01 Original version.

C681M-A 01/01 Added models of peripheral devices the recorder supports, noted that recorder does not support RS-232C port, added

section on

Saving Menu Settings

, revised

Operation

section, and revised

Recording Time Table

C681M-B 3/01 Added 16-channel models.

C681M-C 9/01 Extensive revisions to clarify information. Added sections on

FIFO/Overwrite Mode, IM-Check Mode, Motion Detection

During a Timer Recording,

and

Playback on Another Device

C681M-D 2/02 Removed references to DX3016RX software. Added PelcoNet for remote viewing. Replaced Matsushita brand of DVD-

RAM with Panasonic brand.

REGULATORY NOTICES

This equipment has been tested and found to comply with the limits of a Class A digital de-

vice, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instruction manual, may cause harmful in-

terference to radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required to correct the in-

terference at his own expense.

WARRANTY

Pelco will repair or replace, without charge, any merchandise proved defective

in material or workmanship for a period of one year after the date of shipment.

Exceptions to this warranty are as noted below:

• Five years on Pelco manufactured cameras (CC3500/CC3600 and MC3500/

MC3600 Series); two years on all other cameras.

• Three years on Genex

Series (multiplexers, server, and keyboard).

•Two years on cameras and all standard motorized or fixed focal length lenses.

•Two years on Legacy

, Camclosure

™

Camera Systems, CM6700/CM6800/

CM8500/CM9500/CM9740/CM9760 Matrix, DF5 and DF8 Series Fixed Dome

products.

•Two years on Spectra

, Esprit

™

, and PS20 Scanners, including when used

in continuous motion applications.

•Two years on WW5700 series window wiper (excluding wiper blades).

• Eighteen months on DX Series digital video recorders.

• One year (except video heads) on video cassette recorders (VCRs). Video

heads will be covered for a period of six months.

• Six months on all pan and tilts, scanners or preset lenses used in continu-

ous motion applications (that is, preset scan, tour and auto scan modes).

Pelco will warrant all replacement parts and repairs for 90 days from the date of

Pelco shipment. All goods requiring warranty repair shall be sent freight prepaid

to Pelco, Clovis, California. Repairs made necessary by reason of misuse,

alteration, normal wear, or accident are not covered under this warranty.

Pelco assumes no risk and shall be subject to no liability for damages or loss

resulting from the specific use or application made of the Products. Pelco’s

liability for any claim, whether based on breach of contract, negligence, infringe-

ment of any rights of any party or product liability, relating to the Products shall

not exceed the price paid by the Dealer to Pelco for such Products. In no event

will Pelco be liable for any special, incidental or consequential damages (includ-

ing loss of use, loss of profit and claims of third parties) however caused, whether

by the negligence of Pelco or otherwise.

The above warranty provides the Dealer with specific legal rights. The Dealer

may also have additional rights, which are subject to variation from state to state.

If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100

or (559) 292-1981 to obtain a Repair Authorization number (RA), and provide

the following information:

1. Model and serial number

2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number

3. Details of the defect or problem

If there is a dispute regarding the warranty of a product which does not fall

under the warranty conditions stated above, please include a written explana-

tion with the product when returned.

Method of return shipment shall be the same or equal to the method by which

the item was received by Pelco.

RETURNS

In order to expedite parts returned to the factory for repair or credit, please call

the factory at (800) 289-9100 or (559) 292-1981 to obtain an authorization num-

ber (CA number if returned for credit, and RA number if returned for repair).

All merchandise returned for credit may be subject to a 20% restocking and

refurbishing charge.

Goods returned for repair or credit should be clearly identified with the assigned

CA or RA number and freight should be prepaid. Ship to the appropriate

address below.

If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico:

Service Department

Pelco

3500 Pelco Way

Clovis, CA 93612-5699

If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico:

Intermediate Consignee Ultimate Consignee

American Overseas Air Freight Pelco

320 Beach Road 3500 Pelco Way

Burlingame, CA 94010 Clovis, CA 93612-5699

USA USA

1 2 ... 80 81 82 83 84 85

Commentaires sur ces manuels

Pas de commentaire

Pelco DVR DX3016-060 Manuel d'utilisateur Page 85

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Pelco DVR DX3016-060