Pelco DVR DX3016-060 Manuel d'utilisateur télécharger pdf (Page 67)

66 Pelco Manual C681M-D (2/02)

Alarm List Search

The Alarm List search retrieves alarm video at the time an alarm occurred. It does not re-

trieve pre-alarm recording if the pre-alarm recording option was turned on (PRE A-REC

field in the A-Rec/M-Det Setting menu).

Up to 500 alarm times (DX3009 models) or 800 alarm times (DX3016 models) can be stored

in the alarm list. After the 500th time (DX3009 models) or 801st time (DX3016 models), the

first alarm time is erased and the 501st (or 801st) alarm time is added to the list.

1. Press the SEARCH button to display the Search Selection menu.

2. Make sure the cursor is next to SELECTION CAMERA NO., and then turn the

SHUTTLE ring to the right. The option starts flashing.

3. Turn the JOG dial to select the option, and then turn the SHUTTLE ring to the right.

The option stops flashing.

Turning the JOG dial switches the options as follows:

DX3009 Models – ALL, 1, 2, 3, 4, 5, 6, 7, 8, 9

DX3016 Models – ALL, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16

4. Turn the JOG dial to move the cursor to ALARM LIST SEARCH, and then turn the

SHUTTLE ring to the right to display the Alarm List Search menu.

5. Turn the JOG dial until the cursor is at the desired alarm list number. When the cursor

reaches either the top or the bottom of the list, the Alarm List Search menu scrolls to

the next page. To move through the pages, place the cursor over “No.”, and then turn

the SHUTTLE ring.

6. Turn the SHUTTLE ring to the right. The unit begins the alarm list search and retrieves

the image associated with the selected time.

NOTE:

If the PRE A-REC field in the A-Rec/M-Det Setting menu has been set to

SHORT, MEDIUM, or LONG, the search cannot be done.

Images appear in a 9-camera display (DX3009 models) or 16-camera display

(DX3016 models) if ALL was selected or on a single screen if an individual camera

was selected. The PLAY and PAUSE buttons light.

7. Press the SEARCH button to clear the Alarm List from the screen.

8. To change the 9-camera display (DX3009 models) or 16-camera display (DX3016

models) to a single-camera display, press the CAMERA number button on the front of

the recorder. The display for the single camera appears.

9. Press the PLAY or PAUSE button to play back the searched image.

10. Press the STOP button to stop playback and exit the search function.

Jump to Starting Point

Select this option to play back the oldest recorded data.

1. Press the SEARCH button to display the Search Selection menu.

2. Turn the JOG dial to move the cursor to JUMP TO START POINT, and then turn the

SHUTTLE ring to the right. The Jump to Start Point screen appears.

3. Turn the SHUTTLE ring to the right. The recorder displays the oldest recordings on a

9-camera screen (DX3009 models) or 16-camera screen (DX3016 models). The PLAY

and PAUSE buttons light.

4. To change the 9-camera display (DX3009 models) or 16-camera display (DX3016

models) to a single-camera display, press the CAMERA number button on the front of

the recorder. The display for the single camera appears.

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 84 85

Commentaires sur ces manuels

Pas de commentaire

Pelco DVR DX3016-060 Manuel d'utilisateur Page 67

Commentaires sur ces manuels

Produits connexes et manuels pour Enregistreurs vidéo numériques (DVR) Pelco DVR DX3016-060