Pelco SD5TAC Manuel d'utilisateur télécharger pdf (Page 17)

Pelco Manual C2422M (5/00) 17

Next Menu

Shutter speed Auto

Auto focus mode Auto

Prev (back to prev. menu)

Exit

Main Menu

<Other>

EXIT

Camera Menu

Backlight comp Off

Reset camera

<Auto-iris>

<Next>

Exit

White Balance Menu

Auto white bal Auto

White bal hue 26

Exit

WHITE BALANCE

The settings for white balance are as follows:

Auto

White balance hue

To change the white balance settings:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Camera.

3. Press the Iris Open button to enter the Camera menu.

4. Position the cursor (>) beside Next.

5. Press the Iris Open button to go to the Next menu.

6. Position the cursor (>) beside White Balance.

7. Press the Iris Open button. The White Balance menu appears.

8. Position the cursor (>) beside one of the following choices and press the Iris Open button.

AUTO WHITE BALANCE - The cursor moves to one of two choices: Auto or Off.

Move the joystick up or down to toggle between them. Press the Iris Open button to

select the choice, or press the Iris Close button if you do not want to change the setting.

WHITE BALANCE HUE - Adjust the color by moving the joystick up or down to a

value between 1 (blue end of the spectrum) and 99 (red end). Hold the joystick up or

down to fast forward or fast reverse through the values. As you change the value, you

can see the color change on your monitor. Press the Iris Open button to select the

value, or press the Iris Close button if you do not want to change the setting. If Auto

White Balance is on, it changes to off when you select a new value.

1 2 ... 12 13 14 15 16 17 18 19 20

Pas de commentaire

Pelco SD5TAC Manuel d'utilisateur Page 17