Pelco SD5TAC Manuel d'utilisateur télécharger pdf (Page 13)

Pelco Manual C2422M (5/00) 13

PARK TIME MINUTES

This feature causes the dome to park at preset 1 after a programmed number of minutes of

control inactivity. The time can be set from 1 minute to 720 minutes (12 hours), or it can be set

to zero, which disables this feature.

To change the park time:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Other.

3. Press the Iris Open button to enter the Other menu.

4. Position the cursor (>) beside Park Time Minutes.

5. Press the Iris Open button. The cursor moves to the right, beside the current park time.

6. Move the joystick up or down to change the park time.

7. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

POWER-UP MODE

NOTE:

Preset 1 must be

programmed for the dome to

park.

Main Menu

<Other>

EXIT

Other Menu

Auto flip On

Limit stops On

Park time minutes 0

Scan speed deg/s 25

Exit

This feature lets the dome resume a desired condition following power-up. The menu

includes the following choices.

Default - On power-up, the dome goes through a configuration cycle and stops at

zero reference, showing “Configuration Done,” address, and mode

settings on the screen.

Park - The dome moves to preset 1 when the power-up sequence finishes.

The only text on the screen is the preset label (if any is programmed).

Scan Auto - The dome initiates scan mode when the power-up sequence finishes.

Again, there is no text.

Scan Frame - The dome initiates a frame scan when the power-up sequence finishes.

Scan Rand - The dome initiates a random scan when the power-up sequence finishes.

The default setting is Default.

To select the power-up mode:

1. Program preset 95 (28). The main menu appears.

2. Position the cursor (>) beside Power Up Mode.

3. Press the Iris Open button to enter the Power Up Mode menu.

4. Press the Iris Open button to move the cursor to the right.

5. Move the joystick up or down to cycle through the selections. Stop on the item you

want to select.

6. SELECT - Press the Iris Open button on your keyboard to select your choice.

CANCEL - Press the Iris Close button if you do not want to change the setting.

Main Menu

<Other>

EXIT

Power-Up Menu

Power Up Default

Exit

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire

Pelco SD5TAC Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Accessoires pour appareils photo Pelco SD5TAC