Pelco C1619M-I Manuel d'utilisateur télécharger pdf (Page 14)

14 C1619M-I (11/07)

9. Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and slide the unit

into place. The unit should slide in and out of the rack easily. Refer to Figure 9.

Figure 9. Mounting the Endura Workstation into the Rack

10. After the unit is in place, tighten the two thumbscrews to secure the unit to the rack.

Figure 10. Tightening the Thumbscrews

WARNING: When sliding out the Endura workstation, be careful not to let the unit fall out of the rack.

THUMBSCREW

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Pelco C1619M-I Manuel d'utilisateur Page 14