Pelco PMCL532A Manuel d'utilisateur télécharger pdf (Page 16)

16 C2937M-D (1/09)

RGB/DVI Mode Menu Field Definitions

NOTE: The DVI menu has a more limited selection. It consists of the following options: Input, Contrast, Brightness, Language, Panel Buttons, PIP,

Aspect Ratio, OSD Setting, Color Temp., Default Setting, and Information.

Input: Select RGB or DVI.

Contrast: Adjusts the black level of the video screen image (0 to 100).

Brightness: Adjusts the white level of the video screen image (0 to 100).

H-Position: (RGB only; not in DVI mode.) Adjusts the horizontal position (0 to 100).

V-Position: (RGB only; not in DVI mode.) Adjusts the vertical position (0 to 100).

Frequency: (RGB only; not in DVI mode.) Adjusts the horizontal size of the screen image (0 to 100).

Phase: (RGB only; not in DVI mode.) Adjusts image distortion appearing as horizontal noise on the screen (0 to 100).

Auto Position: (May be dimmed.) Select DISABLE, 1024 x 768, 1280 x 768, 1360 x 768, or 1366 x 768.

• This menu is an override function.

• The menu is enabled only when the input signal is in one of these resolutions. Other resolutions are not displayed, and are set by

autodetection.

• If the screen is not displayed correctly, change the resolution selection.

• The resolution remains as you set it until changed again.

• If the display is distorted or shifted at a resolution of 1366 x 768 or 1360 x 768, adjust the resolution here by manually selecting 1366 x 768

or 1360 x 768.

Language: The choices are English, Italian, French, Spanish, and German.

Panel Buttons: Select UNLOCK or LOCK, and then press Enter to lock/unlock the buttons on the front panel. Authorized users can release the

key lock feature by pressing and holding the SOURCE button for five seconds.

PIP: Select Setup for the picture-in-picture, and then select one of the following:

• PIP Option: Select PIP OFF, PIP ON, or PBP ON.

• PIP Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT.

• PIP Location: Select the PIP position as T/L (top left), T/R (top right), B/R (bottom right), or B/L (bottom left).

• PIP Size: Select the PIP size as LARGE, SMALL, or NORMAL.

• PIP Swap: Select SWAP to interchange Main with PIP. (This is in the DVI mode.)

Aspect Ratio: Select UNDER, 16:9, OVER, or 4:3. (This is in DVI mode.)

OSD Setting: Select Setup for the on-screen display. Then select one of the following:

• OSD H.Position: Adjusts the OSD horizontal position (0 to 100).

• OSD V.Position: Adjusts the OSD vertical position (0 to 100).

• OSD Display Time: Select OFF or a range of 5 to 30 seconds.

Color Temperature: Select NORMAL, COOL, or USER. If you select USER, then select from the following calibrations:

• R-Gain: Adjusts the gain for red (0 to 100).

• G-Gain: Adjusts the gain for green (0 to 100).

• B-Gain: Adjusts the gain for blue (0 to 100).

• R-Offset: Adjusts the offset (or cut) for red (0 to 100).

• G-Offset: Adjusts the offset (or cut) for green (0 to 100).

• B-Offset: Adjusts the offset (or cut) for blue (0 to 100).

• Reset:

Select RESTORE to return to the original color temperature settings.

Default Setting: Select RESTORE to return to the default settings.

Information: Select INFORMATION to access Pelco headquarters information.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire

Pelco PMCL532A Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire Pelco PMCL532A