Pelco DX9100 Manuel d'utilisateur télécharger pdf (Page 98)

98 C634M-D (12/04)

8. Select ch1. The following window shows that the first hard drive is offline and has failed.

Figure 132. Drive 1 Status

9. Turn the recorder off and disconnect all cables.

10. Remove the top cover from the recorder.

PHILLIPS PAN

HEAD SCREW

DRIVE CAGE

PHILLIPS FLAT

HEAD SCREW

HARD DRIVE 1

HARD DRIVE 2

Figure 133. Hard Drive Replacement

11. Remove the four Phillips, pan head screws from the top corners of the cage.

12. Lift the cage and unplug all cables from the hard drives and floppy drive.

13. Remove the cage from the chassis.

14. Remove the four Phillips, flat head screws with washers from the failed drive. There are two screws on the top of the

cage and two on the bottom of the cage.

15. Remove the failed drive.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 104

Pas de commentaire

Pelco DX9100 Manuel d'utilisateur Page 98