Pelco DVR DX8100-EXP Manuel d'utilisateur télécharger pdf (Page 16)

16 C2636M-B (4/07)

To connect the Expansion Unit to the DX8100 DVR:

1. Do one of the following:

•

Desktop mounting:

Set the Expansion to the side or on top of the DX8100.

•

Rack mounting:

Attach the rack mount kit and install the Expansion Unit in the rack enclosure directly above

the DX8100.

2. Connect the 50-pin Expansion cable end (partially shown in Figure 15) to the Expansion Unit connector, and then

connect the 50-pin Expansion cable end to DX8100 I/O card.

3. Plug the power cord back into the DX8100 and then into the wall.

Figure 15.

Interfacing the Expansion Unit and DX8100

1 2 ... 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Pelco DVR DX8100-EXP Manuel d'utilisateur Page 16